skip to main text

Check the State of the Print Head

If printouts are Blurry or Fuzzy/Streaks or Lines/Inaccurate or Bleeding Colors, perform from step 1 until step 6 in order and make sure that you need to replace the print head.

Printing Is Blurry

White Streaks Appear

Colors Are Wrong

  1. Step1 Print the nozzle check pattern.

    After printing the nozzle check pattern, examine the pattern.

    If the pattern is not printed correctly, go to the next step.

  2. Step2 Clean the print head.

    After cleaning the print head, print the nozzle check pattern and check the result.

    If it still does not improve, go to the next step.

  3. Step3 Clean the print head again.

    After cleaning the print head again, print the nozzle check pattern and check the result.

    If it still does not improve, go to the next step.

  4. Step4 Clean the print head deeply.

    After cleaning the print head deeply, print the nozzle check pattern and check the result.

    If it does not improve, turn off the printer, wait for more than 24 hours, and go to the next step.

  5. Step5 Clean the print head deeply again.

    After cleaning the print head deeply again, print the nozzle check pattern and check the result.

    Note

    • Although some air may enter the ink tube, it is not a malfunction. No problem if the nozzle check pattern is printed correctly.

    If the ink still does not come out, see below and perform "Replace Ink in Print Head".

If the nozzle check pattern is not printed correctly even after performing "Replace Ink in Print Head", problems may be solved by replacing the print head.

For details, see details of head replacement.