skip to main text

Setting Up - Advanced Settings of Receive Mode

Make settings to check every call if it is a fax or not and then receive faxes by operating the panel.

  1. Press the FAX button on the printer.

  2. Press the Menu/Wireless connect button.

  3. Use the Left Right buttons to select Receive mode set.

  4. Press the OK button.

    Fax menu screen: Select Receive mode set.

  5. Make sure Tel. priority mode is selected, and then press the OK button.

    Receive mode set. screen: Select Tel. priority mode

  6. Make sure Yes is selected, and then press the OK button.

    Make adv. settings screen: Select Yes

  7. Make sure Manual/auto switch is selected, and then press the OK button.

    Tel. priority mode screen: Select Manual/auto switch

  8. Make sure OFF is selected, and then press the OK button.

    Manual/auto switch setting screen: Select OFF

  9. Make sure User-friendly RX is selected, and then press the OK button.

    Tel. priority mode screen: Select User-friendly RX

  10. Select OFF, and then press the OK button.

    User-friendly RX setting screen: Select OFF

The advanced settings of the receive mode are completed. Go to the next page.