skip to main text

Setting Up - Connecting Phone Line

Make a line connection and various settings for using the fax functions.

  1. Make sure the printer is turned on.

  2. Flick to and tap FAX.

    If FAX is not displayed, select (HOME), and then flick.

    If User management settings is enabled, select the user, and then log in.

    HOME screen: Select FAX

    Easy setup starts.

  3. Tap Start Easy setup.

    Easy setup screen: Make settings for sending/receiving FAX

  4. Tap Next.

    Easy setup screen: Easy setup guides you through the following procedures.

  5. Connect the supplied phone cord to the printer's jack (labeled LINE on the back).

    Easy setup screen: Connect one end of the supplied phone cord to the LINE jack on the rear side of the device.
    figure: Phone cord connection (printer)

  6. Tap Next.

    Easy setup screen: Select Next

  7. Connect the other end of the phone cord to a device such as a modem or splitter.

    Easy setup screen: Connect the other end of the phone cord to your TEL line socket, modem or splitter.

    <Connection example>

    figure: Phone cord connection example (other phone lines)

  8. Tap Next.

    Easy setup screen: Select Next

  9. Remove the cap from the printer's jack (labeled EXT. on the back), and then connect the printer and the telephone with a phone cord.

    Easy setup screen: Remove the cap from EXT. port on the rear side of the device, and then connect a telephone.
    figure: Telephone connection

  10. Tap Next.

    Easy setup screen: Select Next

  11. Tap Start to perform a connection test for checking if the telephone line is connected correctly.

    Easy setup screen: Start the telephone line connection test.

    If none of the above measures solve the problem, the printer may be defective, or the problem may be caused by some other reason.

    As we need to check the detailed status, please contact your nearest Canon service center.

  12. If the telephone line is connected correctly, the telephone line type is identified automatically.

    Easy setup screen: Starting to identify the telephone line type automatically.

  13. Tap No (FAX only).

    Easy setup screen: Select No (FAX only)

  14. Check the specified settings, and then tap OK.

    Easy setup screen: Check FAX settings

The phone line connection is completed.

Next, set the sender information and the date and time. Go to the next page.