skip to main text

Notes on Wireless Connection

  • Make sure that the device (such as a smartphone) and the access point (A) (or wireless network router) are connected. For details on how to check the settings, refer to the manual supplied with the router or contact its manufacturer.

    figure: Wireless/Wired Connection
  • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to the manual of your network device or contact its manufacturer.
  • Check if your device supports IEEE802.11n (2.4 GHz), IEEE802.11g or IEEE802.11b.
  • If your device is set to the "IEEE802.11n only" mode, WEP or TKIP cannot be used as a security protocol. Change the security protocol for your device to something other than WEP and TKIP or change the setting to something other than "IEEE802.11n only."
    The connection between your device and the access point will be temporarily disabled while changing the setting. Do not operate the screen of this guide until the setup is complete.
  • For office use, consult your network administrator.
  • Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing data such as your personal information to a third party.
  • This printer cannot be used over wireless and wired connections at the same time.
  • An "ad hoc connection," in which devices communicate directly with each other without an access point, is not supported.