Connection Using WPS
-
Make sure that the button on the access point is ready to be pressed.
-
Hold down the Wi-Fi button (A) on the printer until the (white) POWER lamp flashes once, then release the Wi-Fi button after the flash.
-
Make sure that the (blue) Wi-Fi lamp flashes quickly and the (white) POWER lamp is lit, then press and hold the button on the access point within 2 minutes.
-
Make sure that the (blue) Wi-Fi lamp and the (white) POWER lamp are lit.
If the (orange) Alarm lamp lights up, refer to "Troubleshooting."
The network connection setup is now complete.