Troubleshooting -WPS-
Select an applicable item.
The Wi-Fi Lamp Flashes Slowly and the Alarm Lamp is Lit
After checking the points described below, wait for a while and configure wireless connection settings again.
- Press the button on only one access point.
- Check the security settings of the access point.
For details on how to check the security settings of the access point, refer to the manual supplied with the access point or contact its manufacturer.
The Wi-Fi Lamp Flashes Quickly and the Alarm Lamp is Lit
- Is the network device (router, etc.) turned on? If the network device is already turned on, turn it off, then turn it back on.
Do not operate the screen of this guide until the power is on. The connection to the network device will be temporarily disabled.
For details on how to check the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer.
If the Alarm lamp still lights up
After checking the points described below, wait for a while and configure wireless connection settings again.
- Are the device (such as a smartphone) and network device configured?
- Are the access point and printer installed in an open space where wireless communications are possible?
- Is the access point operating in IEEE802.11n (2.4 GHz), IEEE802.11g or IEEE802.11b?
