Connection without Using an Access Point (Windows XP)

• Restrictions

(Appears in a new window)

1. Make sure that the screen below is displayed.

   If another screen is displayed, press the Setup button (A) on the printer.

   

2. Press the Setup button.

3. Use the or button (B) to select Device settings, then press the OK button.

   

4. Select LAN settings, then press the OK button.

   
   
   

5. Select Change LAN, then press the OK button.

   

6. Select AP mode active, then press the OK button.

   
   
   

7. Select SSID, then press the OK button.

   
   
   

8. Check SSID information in the printer screen, then press the Back (C).

   You will use the SSID information in the subsequent steps.

   

9. Select Security protocol, then press the OK button.

   
   
   

10. Check the Password (network key), then press the Back button.

    You will use the Password (network key) in the subsequent steps.

    

11. Select Start setup, then press the OK button.

    
    
    

12. Right-click the Wireless Network Connection icon in the notification area of the taskbar on the computer, then select View Available Wireless Networks.

    

13. Select the network name (SSID) you want to use, then click Connect.

    

14. Enter the Password (Network key), then click Connect.

    

15. When connection is complete, click Back until the screen below appears.
    Proceed with the setup.