skip to main text

Wired Connection

Before Starting Wired Connection Setup

  1. Make sure that the printer is turned on.

    If the power is on, the POWER lamp (A) will be lit.

    figure: POWER lamp lights up

    (Appears in a new window)

  2. You will need an Ethernet cable (sold separately).

    figure: Ethernet cable

  3. Remove the Cap (B) from the port located on the left side at the back of the printer.

    figure: Remove the cap

  4. Connect the printer and a network device (router, etc.) with an Ethernet cable (C).

    Do not connect to any other port.

    figure: Connecting Ethernet cable

  5. Make sure that the screen below is displayed.

    If another screen is displayed, press the Setup button (D) on the printer.

    HOME screen

  6. Press the Setup button.

  7. Use the Left or Right button (E) to select Device settings.

    Setup menu screen: Select Device settings

  8. Press the OK button.

  9. Select LAN settings.

    Device settings screen
    arrow
    Device settings screen: Select LAN settings

  10. Press the OK button.

  11. Select Change LAN.

    LAN settings screen: Select Change LAN

  12. Press the OK button.

  13. Select Wired LAN active.

    Change LAN screen
    arrow
    Change LAN screen: Select Wired LAN active

  14. Press the OK button.

  15. When the screen below appears, press the Setup button.

    When connection is complete, LAN appears at the right of the screen.

    LAN settings screen
    arrow
    HOME screen

The network connection setup is now complete.