Troubleshooting -WEP-

"The device may not be able to connect to the network." Appears

1. Check1 Check the wireless router's settings.

   If the wireless router's DHCP function is off, turn it on or specify the printer's IP address (IPv4 only), and then redo the wireless connection settings. Also, make sure the selected WEP key number and entered WEP key are correct.

 

When specifying the IP address of the printer

Specify the printer's IP address as follows.

1. Tap Device settings in the HOME screen.
2. Tap LAN settings.
3. Tap Other settings.
4. Tap TCP/IP settings.
5. Tap IPv4.
6. Tap Yes.
7. Tap IP address.
8. Tap Manual setup.

Follow the on-screen instructions to proceed with setup.

When setup is complete, touch the HOME button and set up a wireless connection again.

• Redo Advanced setup

1. Check2 When the DHCP function is active, enter wireless connection settings of the wireless router directly.

   • Enter the wireless router name directly

2. Check3 When there is no problem with the WEP key number and WEP key, enter the wireless router name directly.

   • Enter the wireless router name directly

   For details on checking or changing the wireless router settings, see the wireless router manual or contact its manufacturer.