Troubleshooting -Standard setup-

"Failed to connect to the wireless router." Appears when the Security Protocol is WEP

1. Check1 Check the WEP key entered for the wireless router is correct.

2. Check2 Check the WEP key number you are using.

   When using WEP key number 2, 3 or 4, change the WEP key number set on the wireless router to 1, and then set up a wireless connection again.

3. Check3 To reset the error, and then redo the printer setup.

   Tap OK.

   • Redo Standard setup

   When establishing a connection without changing the wireless router settings, select a WEP key number by entering wireless connection settings on the printer directly.

   • Advanced setup

   For details on changing the wireless router WEP key number, see the wireless router manual or contact its manufacturer.

4. Check4 Check the wireless router's settings.

   If the wireless router's DHCP function is off, turn it on and redo the wireless connection settings.

   • Redo Standard setup

5. Check5 Check the WEP key of wireless router settings.

   If you are using a wireless router that automatically creates WEP keys, check the WEP key (hexadecimal) created automatically by the wireless router, and then enter it on the printer.

   • Redo Standard setup

   For details on checking the wireless router settings, see the wireless router manual or contact its manufacturer.

6. Check6 Check the MAC address filtering's settings.

   If MAC address filtering is enabled on the wireless router, change the settings to accept the printer's MAC address.

   To check the printer's MAC address, follow these steps.

   1. Touch the HOME button.
   2. Tap Device settings.
   3. Tap LAN settings > Confirm LAN settings > Yes to check MAC address.
      
   • Redo Standard setup

   When the MAC address filtering is disabled on the wireless router, configure wireless connection settings again.

   • Redo Standard setup

   For details on changing the wireless router settings, see the wireless router manual or contact its manufacturer.