Wired Connection
Follow the procedure below to set up a printer.
-
Make sure printer is turned on before starting wired connection setup.
If the power is on, the ON lamp (A) will be lit.
Important
- If printer is performing cleaning, print head alignment, or other processes, wait for the process to finish, before starting setup.
-
If is displayed on the left side of the screen, tap .
-
You will need an Ethernet cable (sold separately).
-
Remove the Cap (B) from the port located on the left side at the back of the printer.
-
Connect the printer and a network device (router, etc.) with an Ethernet cable (C).
Do not connect to any other port.
-
Tap (D).
-
Tap Wired LAN.
-
Tap Settings.
-
Tap Enable/disable Wired LAN.
-
Tap Enable.
-
Tap on the left side of the screen.
When connection is complete, appears at the bottom left of the screen.
The network connection setup is now complete.
Windows
In the taskbar, click the application software you have been using for setup, and then follow the on-screen instructions to proceed with setup.
macOS
Return to the application software and proceed with the setup.
Click in the Dock, follow the on-screen instructions to proceed with setup.