skip to main text

Changing the Connection Mode

You can switch the connection mode on the printer.
Setup is required when connecting to the printer for the first time. Return to the application software and set up the printer.

  1. Follow the steps of the connection mode you want to change, and proceed with the setup.

    If you want to enable the Wireless Direct, SSID/Password (Network key) is required.
    The default SSID is the printer name, and the default Password is the printer's serial number. Check the rear side of the printer or warranty.

    If the SSID or Password is unknown, print the Network Configuration Page and check the SSID/Password field.

    • How to print Network Configuration Page

      Press the Information button on the printer.

      The Network Configuration Page including a PIN code will be printed.

    Press the printer's Wireless select button (A) until the following screen appears.

    figure: Press the Wireless select button

    When enabling both Wi-Fi and Wireless Direct

    figure: Enable Wi-Fi and Wireless Direct

    When enabling Wi-Fi only

    figure: Enable Wi-Fi only

    When enabling Wireless Direct only

    figure: Enable Wireless Direct only

    When disabling both Wi-Fi and Wireless Direct

    figure: Disable Wi-Fi and Wireless Direct

  2. Check the SSID and Password (Network key), and then proceed with the setup in the Wi-Fi settings screen on your device (such as a computer).

When Changing Wireless Direct Settings

See "Changing the Connection Mode" and change the Wireless Direct settings.