skip to main text

Notes on Wireless Connection

  • Make sure your device (such as a smartphone) and the wireless router (A) are connected. For details on checking these settings, see the manual supplied with the wireless router or contact its manufacturer.

    figure: Wireless/Wired Connection
  • Configuration, router functions, setup procedures and security settings of network devices vary depending on the system environment. For details, see the manual for your network device or contact its manufacturer.
  • This printer does not support IEEE802.11ac, IEEE802.11a, or IEEE802.11n (5 GHz). Check if your device supports IEEE802.11n (2.4 GHz), IEEE802.11g or IEEE802.11b.
  • If your device is set to the "IEEE802.11n only" mode, WEP or TKIP cannot be used as a security protocol. Change the security protocol for your device to something other than WEP and TKIP or change the setting to something other than "IEEE802.11n only."
    The connection between your device and the wireless router will be temporarily disabled while the setting is changed. Do not proceed to the next screen of this guide until setup is complete.
  • For office use, consult your network administrator.
  • Note that if you connect to a network with no security protection, your personal information could be disclosed to a third party.
  • You cannot establish a printer with wireless and wired connections at the same time. LAN and USB can be used at the same time.