Make sure printer is turned on before starting wireless connection setup.

If the power is on, touch the touch screen (A) to display the screen (A).

Important

• If printer is performing cleaning, print head alignment, or other processes, wait for the process to finish, before starting setup.

Check that wireless router is on.

If it is already turned on, turn it off, and then turn it back on.

Do not proceed to the next screen of this guide until the power is turned on. The connection to the wireless router will be temporarily disabled.

Check the screen displayed on the printer.

If the following screen is displayed, proceed to the next step.

If one of the following screens is displayed, tap OK, and then proceed to the next step.

If the following screen is displayed, select (Stop), and then proceed to the next step.

If a different screen is displayed, use the close button to exit your current application software, and then perform the setup again.

• Setup

The initial screen for printer setup appears via the model selection screen.

Tap (Network).

Note

• If the administrator mode or screen lock is enabled, the setting screen may not appear for standard users. Ask your network administrator for the setup.

Tap Wi-Fi.

Tap Wi-Fi setup.