"Failed to connect to the wireless router <See manual>" Appears

1. Check1 Check the password entered for the wireless router is correct.

 

When there is no problem with password

1. Check2 Check the wireless router's settings.

   If the wireless router's DHCP function is off, turn it on and redo the wireless connection settings.

2. Check3 Reset the error, and then redo the printer setup.

   Press the OK button.

   • Redo Manual setup

3. Check4 Check the MAC address filtering's settings.

   If MAC address filtering is enabled on the wireless router, change the settings to accept the printer's MAC address.

   To check the printer's MAC address, follow these steps.

   1. Press the Setup button.
   2. Use the or button to select Device settings and press the OK button.
   3. Select LAN settings and press the OK button.
   4. Select Print LAN details and press the OK button.
   5. Check MAC address of wireless LAN of the printed LAN details.
   • Redo Manual setup

4. Check5 Check the wireless router's security protocol (encryption method) settings.

   If the wireless router is set to communicate using the IEEE802.11n standard only and encryption is set to TKIP, change the encryption standard to something other than TKIP or change the communication standard, and then redo the wireless connection settings.

   If the encryption standard is set to TKIP, IEEE802.11n cannot be used as the communication standard.

   • Redo Manual setup

   For details on checking or changing the wireless router settings, see the wireless router manual or contact its manufacturer.