Wired Connection
Follow the procedure below to setup a printer.
Note
- Notes on Wired Connection (Appears in a new window)
-
Make sure printer is turned on before starting wired connection setup.
If the power is on, the ON lamp (A) will be lit.
Important
- If printer is performing cleaning, print head alignment, or other processes, wait for the process to finish, before starting setup.
-
If is displayed on the left side of the screen, tap to display the following screen.
-
You will need an Ethernet cable (sold separately).
-
Connect the printer and a network device (router, etc.) with an Ethernet cable (B).
Do not connect to any other port.
-
Flick the screen up or down, then tap LAN settings.
-
Tap Wired LAN.
-
Tap Settings.
-
Tap Enable/disable Wired LAN.
-
Tap Enable.
-
If the screen on the below appears, tap OK.
If the following screen is not displayed, proceed to the next step.
-
Tap on the left side of the screen.
The network connection setup is now complete.
Once connection is complete, appears at the upper right of the screen.
If performing setup with software, return to the software and proceed with the installation.
Windows
Click in the taskbar, follow the on-screen instructions to proceed with setup.
macOS
Click in the Dock, follow the on-screen instructions to proceed with setup.