skip to main text

WCN Connection

  1. Tap Other connection types.

    Wi-Fi setup screen: Select Other connection types

  2. Tap WPS (PIN code method).

    Other connection types screen: Select WPS (PIN code method)

  3. When the screen on the below appears, write down a PIN code.

    WPS (PIN code method) screen: Set the PIN below to the wireless router within 10 minutes.

  4. Follow the procedure below to proceed with computer settings.

    The setup procedures vary depending on your system environment.

    Windows 10

    1. From the Start menu of the computer, select Windows System.

    2. Select This PC.

    3. Select Network.

    Windows 8.1

    1. Click arrow at the bottom left of the Start screen of the computer.

    2. Select This PC.

    3. Select Network.

    Windows 7

    1. From the Start menu of the computer, select Computer.

    2. Select Network.

  5. Select Add devices and printers on the Network menu or Add a wireless device on the menu.

  6. Follow the on-screen instructions on the computer to proceed with setup, and then enter the PIN code.

    Note

    • If you don't know how to configure WCN settings, see Windows Help.

  7. When the screen on the below appears, tap OK.

    Completion screen (Connected to the wireless router.)

    If a different screen appears, see "Troubleshooting."

  8. Tap HOME on the left side of the screen.

    LAN settings screen
    HOME screen

    The network connection setup is now complete.

    Once connection is complete, Network appears at the upper right of the screen.

    If performing setup with software, return to the software and proceed with the installation.

    Click Setup icon in the taskbar, follow the on-screen instructions to proceed with setup.

    taskbar