Wired Connection

Make sure printer is turned on before starting wired connection setup.

If the power is on, the ON lamp (A) will be lit.

Important

• If printer is performing cleaning, print head alignment, or other processes, wait for the process to finish, before starting setup.

You will need an Ethernet cable (sold separately).

Remove the Cap (B) from the port located on the left side at the back of the printer.

Connect the printer and a network device (router, etc.) with an Ethernet cable (C).

Do not connect to any other port.

Press the HOME button (D).

Use the or button (E) to select LAN settings and press the OK button.

Select Wired LAN and press the OK button.

Select Settings and press the OK button.

Select Enable/disable Wired LAN and press the OK button.

Select Enable and press the OK button.

If the following screen appears

Press the OK button, and then proceed to step 11.

Press the HOME button.

The network connection setup is now complete.

Once connection is complete, appears at the upper right of the screen.

If performing setup with software, return to the software and proceed with the installation.

Windows

Click in the taskbar, follow the on-screen instructions to proceed with setup.

macOS

Click in the Dock, follow the on-screen instructions to proceed with setup.