skip to main text

Wired Connection

Before Starting Wired Connection Setup

  1. Make sure that the printer is turned on.

    If the power is on, the POWER lamp (A) will be lit.

    figure: POWER lamp lights up

    (Appears in a new window)

  2. You will need an Ethernet cable (sold separately).

    figure: Ethernet cable

  3. Remove the Cap (B) from the port located on the right side at the back of the printer.

    figure: Remove the cap

  4. Connect the printer and a network device (router, etc.) with an Ethernet cable (C).

    Do not connect to any other port.

    figure: Connecting Ethernet cable

  5. Hold down the RESUME/CANCEL button (D) on the printer until the POWER lamp flashes 11 times, then release the RESUME/CANCEL button after the eleventh flash.

    The wired connection setup is complete.

    figure: Press and hold the RESUME/CANCEL button and the POWER lamp flashes 11 times

The network connection setup is now complete.