skip to main text

Connection Using WPS

  1. Tap Start setup on the printer.

    Push button method screen: To start setup, tap Start setup on the device

  2. Press and hold the WPS button on the access point.

    For details on pressing the WPS button, refer to the access point manual.

  3. Tap OK on the printer within 2 minutes.

    Push button method screen: Press and hold the WPS button on the access point, then tap OK on the device

    If another screen appears, refer to "Troubleshooting."

  4. When the screen below appears, tap OK.

    Completion screen (Connected to the access point.)
    arrow
    HOME screen

    If another screen appears, refer to "Troubleshooting."

The network connection setup is now complete.