Connection via Standard setup

  1. Press the OK button.

    Access point name entry screen

  2. Enter the access point name/network name (SSID).

    Character entry is case-sensitive so be sure to confirm.

    If you don't know your access point name, refer to the manual supplied with the access point or contact its manufacturer.

    (Appears in a new window)

    Access point name entry screen

  3. Press the left Function button.

    Access point name entry screen

  4. Make sure that the access point name/network name (SSID) is correct.

  5. Press the left Function button.

    Access point name confirmation screen

  6. One of the screens below will be displayed on the printer.

    If Connected to the access point. appears on the printer, the network does not require a password. Go to step 12 and proceed with the setup.

    WEP key entry screen
    Passphrase entry screen

    If another screen appears, refer to "Troubleshooting."

  7. Press the OK button.

  8. Enter the network password (WEP key or passphrase).

    Character entry is case-sensitive so be sure to confirm.

    If you don't know the network password for your access point, refer to the manual supplied with the access point or contact its manufacturer.

    (Appears in a new window)

    Network key entry screen

  9. Press the left Function button.

    Network key entry screen

  10. Make sure that the network password is correct.

    Character entry is case-sensitive.

  11. Press the left Function button.

    WEP key confirmation screen
    Passphrase confirmation screen

  12. When the screen below appears, press the OK button.

    Completion screen (Connected to the access point.)
    arrow
    HOME screen

    If another screen appears, refer to "Troubleshooting."

The network connection setup is now complete.