Connection Using WPS

1. Select WPS.

   
   
   

2. Press the OK button.

3. Select Push button method.

   

4. Press the OK button.

   • To set up a connection using the PIN code method, select PIN code method and press the OK button, then see here

5. Press the OK button.

   

6. Press and hold the WPS button on the access point.

   For details on pressing the WPS button, refer to the access point manual.

7. Press the OK button on the printer within 2 minutes.

   The (blue) Wi-Fi lamp on the printer flashes while searching for or connecting to the access point.

   
   • Troubleshooting

   If another screen appears, refer to "Troubleshooting."

8. When the screen below appears, press the OK button.

   
   
   
   • Troubleshooting

   If another screen appears, refer to "Troubleshooting."

The network connection setup is now complete.