skip to main text

Connection Using WPS

  1. Make sure that the button on the access point is ready to be pressed.

  2. Hold down the Wi-Fi button (A) on the printer until the Alarm lamp (B) flashes once, then release the Wi-Fi button after the flash.

    figure: Press and hold the Wi-Fi button and the Alarm lamp flashes once

  3. Make sure that the Wi-Fi lamp (C) flashes quickly and the ON lamp (D) is lit, then press and hold the button on the access point within 2 minutes.

    figure: The Wi-Fi lamp flashes quickly and the ON lamp lights up

  4. Make sure that the Wi-Fi lamp and the ON lamp are lit.

    figure: The Wi-Fi lamp and the ON lamp lights up

    If the Alarm lamp lights up, refer to "Troubleshooting."

The network connection setup is now complete.