skip to main text

Starting Up Speed Dial Utility2

Important

  • Before starting up Speed Dial Utility2, make sure that the printer is connected to the computer correctly.
  • Do not plug in or unplug any cables while the printer is in operation, or when the computer is in sleep or standby mode.
  • If your printer is compatible with LAN connection, make sure that the printer is connected to the computer with LAN connection to use Speed Dial Utility2 via LAN connection.
  • The password entry screen may appear during startup or operation. If it appears, enter the administrator password, and then click OK. If you do not know the administrator password, contact the administrator of the printer.

Note

  • If you are using macOS 15 or later, you must configure each application to allow device discovery on the local network. Failing to enable device discovery may restrict software functionality or prevent it from starting properly.
    For detailed instructions, refer to "Setting Up Local Network Device Discovery."
    The list of applications displayed under Local Network may include all or some of the following, depending on usage.
    • Speed Dial Utility2

Follow the procedure below to start up Speed Dial Utility2.

  1. Select Applications on Go menu of Finder.

  2. Double-click Canon Utilities folder.

  3. Double-click Speed Dial Utility2 folder.

  4. Double-click Speed Dial Utility2.

    Speed Dial Utility2 starts up.

Note

  • You can also start up Speed Dial Utility2 from Quick Utility Toolbox.