Settings (Scanning from a Computer) Dialog

Select the type of item to be scanned.

• Automatically detecting the item: Auto
• Scanning documents: Document or Document (Platen)
• Scanning documents from the ADF (Auto Document Feeder): Document, Document (ADF), or Document (ADF Manual Duplex)
• Scanning magazines: Magazine
• Scanning photos: Photo

Important

• When scanning documents from ADF with Auto selected, Original Size will not be set automatically.
• Item types supported by Auto are photos, postcards, business cards, magazines, newspapers, documents, and BD/DVD/CD.

• To scan the following types of items, specify the item type or size. You cannot scan correctly with Auto.

  • A4 size photos
  • Text documents smaller than 2L (5 inches x 7 inches) (127 mm x 178 mm), such as paperback pages with the spine cut off
  • Items printed on thin white paper
  • Long narrow items such as panoramic photos
• Reflective disc labels may not be scanned as expected.

• Place items correctly according to the type of item to be scanned. Otherwise, items may not be scanned correctly.

  Refer to "Positioning Originals (Scanning from Computer)" for how to place items.

• When scanning two or more documents from the ADF, place documents of the same size even if Auto is set.

Note

• To convert text in the image into text data after scanning, specify Source Type instead of selecting Auto.
• To reduce moire, set Source Type to Magazine or select the Reduce moire checkbox in Image Processing Settings.
• Select Auto to set Color Mode, Original Size, and Resolution automatically.
• In Auto Scan, the outline of the subjects is emphasized. Set the outline emphasis level with Unsharp Mask Level in the Settings (General Settings) dialog.
• When Document is selected with documents placed on the ADF, and a size that supports scanning from the ADF is selected for Original Size, those placed on the ADF will be scanned.
• To scan both sides of each document at one time, select Document (ADF), and then select the Scan both sides when scanning from the ADF checkbox.

Select the size of the item to be scanned.

When you select Custom, a screen in which you can specify the paper size appears. Select a Unit, then enter the Width and Height, and then click OK.

Note

• Click Defaults to restore the specified settings to the default settings.

Select the resolution of the item to be scanned.

The higher the resolution (value), the more detail in your image.

• Resolution

Set the output resolution. To use the resolution set in the screen displayed by clicking Driver in the IJ Scan Utility Lite main screen, select Same as resolution. To set a custom value, select Custom (xxxdpi). Output resolution of up to 19200 dpi can be set.

• Resolution

This appears when you select Auto, Document, or ADF for Source Type.

Click to display the Original Scan Orientation Settings dialog in which you can set the orientation and binding side of the documents to be scanned from the ADF.

Important

• Binding Side cannot be specified when scanning only the front side of each document.

Click (Right Arrow) to set the following.

Sharpen outline

Emphasizes the outline of the subjects to sharpen the image.

Note

• Set the outline emphasis level in the Settings (General Settings) dialog.

Reduce show-through

Sharpens text in an item or reduces show-through in newspapers, etc.

Reduce moire

Reduces moire patterns.

Printed materials are displayed as a collection of fine dots. "Moire" is a phenomenon where uneven gradation or a stripe pattern appears when such photos or pictures printed with fine dots are scanned.

Note

• Scanning takes longer than usual when you enable Reduce moire.

Correct slanted text originals

Detects the scanned text and corrects the angle (within -0.1 to -10 degrees or +0.1 to +10 degrees) of the document.

Important

• The following types of documents may not be corrected properly since the text cannot be detected correctly.

  • Documents in which the text lines are inclined more than 10 degrees or the angles vary by line
  • Documents containing both vertical and horizontal text
  • Documents with extremely large or small fonts
  • Documents with small amount of text
  • Documents containing figures/images
  • Hand-written text
  • Documents containing both vertical and horizontal lines (tables)

Note

• Scanning takes longer than usual when you enable Correct slanted text originals.

Detect the orientation of text original and rotate image

Automatically rotates the image to the correct orientation by detecting the orientation of text in the scanned document.

Important

• Only text documents written in the language selected from Document Language in the Settings (General Settings) dialog are supported.

• The orientation may not be detected for the following types of settings or documents since the text cannot be detected correctly.

  • Resolution is outside the range of 300 dpi to 600 dpi
  • Font size is outside the range of 8 points to 48 points
  • Documents containing special fonts, effects, italics, or hand-written text
  • Documents with patterned backgrounds

  In that case, select the Check scan results and specify save settings checkbox, and then rotate the image in the Save Settings dialog.

Enter the file name of the image to be saved. When you save a file, the date and four digits are appended to the set file name in the "_20XX0101_0001" format.

Note

• When you select the Save to a subfolder with current date checkbox, the date and four digits are appended to the set file name.

Displays the folder in which to save the scanned images. To add a folder, select Add... from the pop-up menu, click (Plus) in the displayed dialog, and then specify the destination folder.

The default save folder is the Pictures folder.

Select the data format in which to save the scanned images.

You can select JPEG/Exif, TIFF, PNG, PDF, or PDF (Multiple Pages).

Note

• When Auto is selected and the items are placed correctly, the scanned images are automatically saved in the following data formats.

  • Photos, postcards, BD/DVD/CD, and business cards: JPEG
  • Magazines, newspapers, and documents: PDF

  Refer to "Positioning Originals (Scanning from Computer)" for how to place items.

• With network connection, scanning may take longer than usual when you set TIFF or PNG in Data Format.
• When PDF or PDF (Multiple Pages) is selected in Driver, images up to 9600 pixels x 9600 pixels can be scanned.

Select the compression type for saving PDF files.

Standard

It is recommended that you normally select this setting.

High

Compresses the file size when saving, allowing you to reduce the load on your network/server.

Select this checkbox to convert text in images into text data and create PDF files that support keyword search.

Note

• If text cannot be searched correctly, we recommend that you select 300 dpi or higher for Resolution.
• PDF files that are searchable in the language selected in Document Language on the (General Settings) tab of the Settings dialog are created.

Select this checkbox to create a current date folder in the folder specified in Save in and save scanned images in it. The folder will be created with a name such as "20XX_01_01" (Year_Month_Date).

If this checkbox is not selected, files are saved directly in the folder specified in Save in.

Select this checkbox to scan images up to 21000 pixels x 30000 pixels and 1.8 GB.

Note

• When this checkbox is not selected, images up to 10208 pixels x 14032 pixels can be scanned.

Select this when you want to enhance or correct the scanned images.

You can specify the application from the pop-up menu.

Select this when you want to use the scanned images as they are in an application that allows you to browse or organize images.

You can specify the application from the pop-up menu.

Select this when you also want to save the scanned images to a folder other than the one specified in Save in.

You can specify the folder from the pop-up menu.

Select this when you want to send e-mails with the scanned images attached.

You can specify the e-mail client you want to start from the pop-up menu.

Select this when you want to convert text in the scanned image into text data.

You can specify the application from the pop-up menu.

Displays the extracted text in a specified application.

Note

• To add an application to the pop-up menu, select Add... from the pop-up menu, then click (Plus) in the displayed dialog and specify the application.

Saves to the folder specified in Save in.

Note

• To add an application or folder to the pop-up menu, select Add... from the pop-up menu, click (Plus) in the displayed dialog, and then specify the application or folder.

Specify the e-mail client to use for attaching scanned images.

Note

• To add an e-mail client to the pop-up menu, select Add... from the pop-up menu, then click (Plus) in the displayed dialog and specify the e-mail client.