Scan-from-Operation-Panel Settings Screen

Besides the scanner or printer that IJ Scan Utility Lite is currently set to use, you can add and set a scanner or printer with which you want to scan from the printer's operation panel or personal scanner's scanner buttons.

To display the Scan-from-Operation-Panel Settings screen, click Scan-from-Operation-Panel Settings in the Settings (General Settings) dialog.

Scanners

The Bonjour service names of the scanners or printers with which you can scan from the operation panel are displayed.
You can select up to two scanners and printers in total at the same time.

Important

If you have changed the Bonjour service name after selecting your scanner or printer by Bonjour service name, click (Refresh) in the Settings (General Settings) dialog, deselect the checkbox of the old Bonjour service name, and then select the new Bonjour service name.

Note

If the Bonjour service name of your scanner or printer does not appear or cannot be selected in the Scan-from-Operation-Panel Settings screen, check the following, click OK to close the screen, and then reopen it and try selecting again.
- Network settings of your scanner or printer is completed.
- (Refresh) in the Settings (General Settings) dialog has been clicked.
- Network communication between your scanner or printer and computer is enabled.
  If the problem is still not solved, click Home to return to the top page of the Online Manual for your model and search for "Network Communication Problems."

Enables scanning from the operation panel

Select this checkbox to scan from the printer's operation panel or personal scanner's scanner buttons.

Instructions

Opens this guide.