Home

Click Here to Search

SU029W
IJ Scan Utility

Scanning Multiple Documents at One Time from the ADF (Auto Document Feeder)

Place multiple documents on the ADF (Auto Document Feeder) and scan at one time.

Note

  • You can scan multiple documents at one time from the ADF when scanning via Auto, Document, Custom, or ScanGear.

    See "Scanning with Application Software that You are Using (ScanGear)" for your model from Home of the Online Manual for how to scan using ScanGear (scanner driver).

Using Auto Scan

The item type is detected automatically. Click Auto and scan.

Easy Scanning with Auto Scan

Not Using Auto Scan

In the Settings dialog box, set Select Source to ADF or Auto, and scan.

Note

  • The screens for scanning documents are used as examples in the following descriptions.

  1. Place the documents on the ADF.

    Placing Documents (ADF (Auto Document Feeder))

  2. Start IJ Scan Utility.

    Starting IJ Scan Utility

  3. Click Settings....

    figure: IJ Scan Utility

    The Settings dialog box appears.

  4. Click Document Scan.

    figure: Settings dialog box

  5. Select Select Source according to the documents to be scanned.

    To scan only the front side of each document, select Document (ADF/Platen) or Document (ADF Simplex).

    To scan the front side then the back side of each document, select Document (ADF Manual Duplex).

    figure: Settings dialog box

  6. Set the color mode, document size, and scanning resolution as required.

    Click Document Scan Orientation Settings... to specify the orientation of the documents to be scanned. In the displayed dialog box, you can specify the Orientation and Binding Side. How to place the documents when scanning the back sides depends on the Binding Side.

    When setting is completed, click OK.

    figure: Settings dialog box

    The IJ Scan Utility main screen appears.

    Note

  7. Click Document.

    figure: IJ Scan Utility

    Scanning starts.

    Note

    • Click Cancel to cancel the scan.

    When Document (ADF Manual Duplex) is selected for Select Source, proceed to Step 8.

  8. Follow the on-screen instructions to place the documents.

    Note

    • The screens for scanning with Orientation set to Portrait are used as examples in the following descriptions.

    When Long edge is Selected for Binding Side in Document Scan Orientation Settings...

    Place the documents after rotating the output documents 180 degrees.

    figure: Manual Duplex Scanning dialog box (Long edge)

    When Short edge is Selected for Binding Side in Document Scan Orientation Settings...

    Place the documents without changing the orientation of the output documents.

    figure: Manual Duplex Scanning dialog box (Short edge)

  9. Click OK.

    Scanning starts.

Note

  • Click Cancel to cancel the scan.

  • Scanned images are saved in the folder set for Save in in the corresponding Settings dialog box displayed by clicking Settings.... In each Settings dialog box, you can also make advanced scan settings.

Page top