skip to main text

Scan Quality (Image Displayed on the Monitor) Is Poor

  1. Check 1 Increase the scanning resolution if the image is jagged.

  2. Check 2 Set the display size to 100 %.

    Some applications do not display images clearly if the display size is too small.

  3. Check 3 Clean the platen and document cover.

  4. Check 4 If moire (stripe pattern) appears, take the following measures and scan again with IJ Scan Utility.

    • Set one of the following settings in the Settings (Document Scan) dialog box, Settings (Custom Scan) dialog box, or Settings (Scan and Stitch) dialog box of IJ Scan Utility, then scan from the IJ Scan Utility main screen.

      • Set Source Type to Magazine and set Color Mode to Color
      • Select the Reduce moire checkbox in Image Processing Settings

    • On the Basic Mode tab of ScanGear (scanner driver), select Magazine (Color) in Select Source.

      Refer to "Basic Mode Tab" for your model from Home of the Online Manual for details.

    • On the Advanced Mode tab of ScanGear, set Descreen in Image Settings to ON.

      Refer to "Image Settings" for your model from Home of the Online Manual for details.

    Note

    • If moire appears when you scan a digital print photo, take the above measures and scan again.

  5. Check 5 Check the monitor's color depth.

    Refer to Help of Windows or the monitor's manual for details on how to check the monitor's color depth.

  6. Check 6 If the document is in poor condition (dirty, faded, etc.), then set Reduce Dust and Scratches, Fading Correction, Grain Correction, etc. in Image Settings on the Advanced Mode tab of ScanGear.

    Refer to "Image Settings" for your model from Home of the Online Manual for details.

  7. Check 7 If the color tone of images is different from the original document, take the following measures and scan again.

    • On the Advanced Mode tab of ScanGear, set Image Adjustment in Image Settings to None.

      Refer to "Image Settings" for your model from Home of the Online Manual for details.

    • On the Color Settings tab in the Preferences dialog box of ScanGear, set Color Matching.

      Refer to "Color Settings Tab" for your model from Home of the Online Manual for details.