Error Message Appears and the ScanGear (Scanner Driver) Screen Does Not Appear
- Check 1 Make sure that your scanner or printer is turned on.
- Check 2 Turn off your scanner or printer, then reconnect the USB cable and replug the power cord.
- Check 3 Connect the USB cable to a different USB port on the computer.
- Check 4 If the USB cable is connected to a USB hub, remove it from the USB hub and connect it to a USB port on the computer.
-
Check 5 Make sure MP Drivers is installed.
If not installed, install MP Drivers from the Setup CD-ROM or our website.
-
Check 6 Select your scanner or printer on the application's menu.
Note
- The operation may differ depending on the application.
-
Check 7 Make sure that the application supports TWAIN.
You cannot start ScanGear (scanner driver) from applications not supporting TWAIN.
- Check 8 Exit ScanGear if it is running on another application.