Scanning Multiple Documents at One Time from the ADF (Auto Document Feeder)

Place multiple documents on the ADF (Auto Document Feeder) and scan at one time.

This section explains how to scan one side of the documents at a time. To scan both sides of the documents automatically, refer to "Scanning Both Sides of Each Document at One Time".

Important

Scanning using the ADF is not available for Photo.

Note

Refer to "Scanning Using Application Software (ScanGear)" for how to scan using ScanGear (scanner driver).

Using Auto Scan:

The item type is detected automatically. Click Auto in the IJ Scan Utility main screen and scan.

Scanning Easily (Auto Scan)

Important

Auto does not appear depending on your model.

Not Using Auto Scan:

In the Settings dialog box, set Source Type to ADF or Auto, and scan.

Note

The screens for scanning documents are used as examples in the following descriptions.

Place the documents on the ADF.
- Placing Documents (ADF (Auto Document Feeder))
Start IJ Scan Utility.
Click Settings...

The Settings dialog box appears.
Click Document Scan in the Settings (Scanning from a Computer) Dialog Box.
Select Source Type according to the documents to be scanned.

To scan only the front side of each document, select Document (ADF Simplex). Alternatively, select Document (ADF/Platen), and then deselect the Scan both sides when scanning from the ADF checkbox.

To scan the front side then the back side of each document, select Document (ADF/Platen), and then select the Scan both sides when scanning from the ADF checkbox. Alternatively, select Document (ADF Manual Duplex).

Important
- Document (ADF/Platen) does not appear depending on your model.
Set the color mode, document size, and scanning resolution as required.

Click Original Scan Orientation Settings... to specify the orientation of the documents to be scanned. In the displayed dialog box, you can specify the Orientation and Binding Side. How to place the documents when scanning the back sides depends on the Binding Side.

Note
- Once settings are made in the Settings dialog box, the same settings can be used for scanning from the next time.
- In the Settings dialog box, specify image processing settings such as slant correction, set where to save the scanned images, and more, as needed.
When setting is completed, click OK.

The IJ Scan Utility main screen appears.

Note
- For the setting items in the Settings dialog box, see Settings (Scanning from a Computer) dialog box.
Click Document in the IJ Scan Utility main screen.

Scanning starts.

Note
- To cancel the scan, click Cancel.
When Document (ADF Manual Duplex) is selected for Source Type, follow the on-screen instructions to load the documents, and then click OK.

Note
- When Document (ADF Duplex) is selected for Source Type, the Manual Duplex Scanning dialog box does not appear; both sides of the documents are scanned automatically. Refer to "Scanning Both Sides of Each Document at One Time" for details.