skip to main text

Network Selection Screen

You can select the scanners or printers to be used for scanning or printing over a network from your computer or the operation panel.

Network Selection Screen

In Product Name in the Settings (General Settings) dialog, select an item with "Network" after the product name from the list, then click Select that appears to the right of the product name to display the network selection screen.

Scanners

The Bonjour service names of the scanners or printers that can be used over the network are displayed.

You can select one scanner or printer per model. Selecting a scanner or printer automatically enables scanning from the operation panel.

Important

  • You cannot use over the network if Bonjour is disabled. Enable Bonjour on your scanner or printer.
  • If you have changed the Bonjour service name after selecting your scanner or printer by Bonjour service name, reopen the network selection screen and select the new Bonjour service name from Scanners.
Instructions
Opens this guide.
Scan-from-Operation-Panel Settings

The Scan-from-Operation-Panel Settings screen appears. You can select up to three scanners and printers in total for scanning from the operation panel. You can scan items using the operation panel of the selected scanner or printer, and send the scanned images to your computer over a network.

Important

  • When using a model with which you cannot scan over a network from the operation panel, that model does not appear in Scanners and the setting is not available.

Scan-from-Operation-Panel Settings Screen

Click Scan-from-Operation-Panel Settings in the network selection screen to display the Scan-from-Operation-Panel Settings screen.

Scanners

The Bonjour service names of the scanners or printers that can be used over the network are displayed.
You can select up to three scanners and printers in total at the same time.

Important

  • You cannot use over the network if Bonjour is disabled. Enable Bonjour on your scanner or printer.
  • If you have changed the Bonjour service name after selecting your scanner or printer by Bonjour service name, reopen the network selection screen and select the new Bonjour service name from Scanners.

Note

  • If the Bonjour service name of your scanner or printer does not appear or cannot be selected, check the following, click OK to close the screen, then reopen it and try selecting again.

    • The scanner driver (ICA (Image Capture Architecture) driver) is installed
    • Network settings of your scanner or printer is completed after installing the scanner driver
    • Network communication between your scanner or printer and computer is enabled
      If the problem is still not solved, see Network Communication Problems.