Using the Stand
-
Place the item on the platen.
-
Open the document cover.
-
Place the item with the side to scan facing the platen and align it with the alignment mark.
Important
- If you open the document cover wide, the scanner may fall over.
-
Portions placed over (A) (0.094 inch (2.4 mm) from the left edge of the platen) or (B) (0.106 inch (2.7 mm) from the front edge) cannot be scanned.
-
-
Close the document cover gently.
While scanning, hold the document cover lightly with your hand to keep it closed.
Important
- When scanning with the scanner positioned upright, do not subject it to vibration during operation. The correct image results may not be obtained (for example, images blur).
-
When using the scanner in the upright position, the item type may not be detected automatically. Specify the item type and scan.