skip to main text

Using the Stand

  1. Place the item on the platen.

    1. Open the document cover.

    2. Place the item with the side to scan facing the platen and align it with the alignment mark.

      Important

      • If you open the document cover wide, the scanner may fall over.

      • Portions placed over (A) (0.094 inch (2.4 mm) from the left edge of the platen) or (B) (0.106 inch (2.7 mm) from the front edge) cannot be scanned.

        figure: Areas that cannot be scanned

  2. Close the document cover gently.

    While scanning, hold the document cover lightly with your hand to keep it closed.

    Important

    • When scanning with the scanner positioned upright, do not subject it to vibration during operation. The correct image results may not be obtained (for example, images blur).

    • When using the scanner in the upright position, the item type may not be detected automatically. Specify the item type and scan.