Cleaning the Platen Glass
If the platen glass is dirty, originals may not be scanned clearly, or the size of the original may not be detected clearly.
1
Turn OFF the machine, and unplug the power cord from the AC power outlet. Turning OFF the Machine
Turning the printer OFF erases any queued print data. Data such as documents received and held in memory, documents waiting to be sent, and reports that are automatically printed after being sent or received are not deleted.
2
Open the feeder.
3
Wipe the reverse side of the feeder and the platen glass.
|
1
|
Wipe the platen glass.
Wipe the platen glass with the included cleaning cloth. If you cannot remove the dirt, wet a soft cloth with water and wring it out well, then wipe the area with it. Afterwards, wipe the area with a soft and dry cloth.
 |
|
2
|
Wipe the reverse side of the feeder.
Clean the areas with a cloth dampened with water. Then, wipe the area with a soft, dry cloth.
 |
4
Wait for the cleaned area to dry completely.
5
Gently close the feeder.
6
Insert the power plug into the power outlet, and turn ON the machine. Turning ON the Machine