Printing on Postcards

This section describes the procedure for postcard printing.

1. Load postcard on the printer

2. Open the printer driver setup window

3. Select commonly used settings

   Display the Quick Setup tab, and for Commonly Used Settings, select Standard.

4. Select the media type

   For Media Type, select Hagaki A, Ink Jet Hagaki, Hagaki K, or Hagaki.

   Important

   • This printer cannot print on postcards that have photos or stickers attached.
   • When printing on each side of a postcard separately, you will get cleaner printing if you print the message side first and then print the address side.
   • The paper settings on the printer driver and the cassette paper information to register on the printer are different, depending on whether you are printing on the address side or the message side. For details about the cassette paper information to be registered on the printer, see the following:
     • Paper Settings on the Printer Driver and the Printer (Media Type)
     • Paper Settings on the Printer Driver and the Printer (Paper Size)

5. Select the paper size

   For Printer Paper Size, select Hagaki 100x148mm or Hagaki 2 200x148mm.

   Important

   • Return postcards can be used only when you print them from the computer.
   • When printing a return postcard, always set the paper size to Hagaki 2 200x148mm from your application software or the printer driver.
   • Do not fold the return postcard. If a crease is formed, the printer will not be able to feed the postcard properly, and this condition will cause line shifts or a paper jam.

6. Set the print orientation

   To print the address horizontally, set Orientation to Landscape.

7. Select the print quality

   For Print Quality, select High or Standard, whichever best suits the purpose.

8. Complete the setup

   Click OK.
   When you execute printing, the data will be printed onto the postcard.

Important

• When you execute postcard printing, a guide message is displayed.
  When the guide message is displayed, select Do not show this message again if you do not want any guide messages to be displayed.
  To display guide messages again, open the Maintenance tab and click View Printer Status to start the Canon IJ Status Monitor.
  On the Option menu, choose Display Guide Message and click Hagaki Printing to enable the setting.
• When printing on media other than postcards, load the media according to usage method of that media, and click Start Printing.