skip to main text

Dividing and Printing Posters

The tiling/poster printing function allows you to enlarge image data, divide it into several pages, and print these pages on separate sheets of paper. You can also paste the pages together to create a large print like a poster.

The procedure for dividing and printing posters is as follows:

Setting for Dividing and Printing Posters

  1. Open the printer driver setup window

  2. Select the print paper size

    From the Page Size list on the Page Setup tab, select the size of the paper loaded in the printer.

  3. Set number of divisions

    On the Layout tab, select the Page Layout check box, and from the pull-down menu, select Poster (1 x 2) or Poster (2 x 2).
    The current settings are displayed in the settings preview on the left side of the window.

    figure:Select Poster (1 x 2) or Poster (2 x 2) for Page Layout on the Page Setup tab
  4. Complete the setup

    Click OK on the Layout tab.
    When you execute print, the document will be divided into several pages during printing.

    Important

    • When there is a checkmark next to Banner Printing under Roll Paper Options dialog box on the Page Setup tab, Page Layout is grayed out and cannot be set.
    • If Spooling at Printer Driver in Special Settings dialog box is set to No (Use RAW Spooling), Page Layout is grayed out and cannot be set.

Printing Only Specific Pages

If ink becomes faint or runs out during printing, you can reprint only the specific pages by following the procedure below:

  1. Display Pages to Print dialog box

    For Page Layout, click Set... to display the Pages to Print dialog box.

  2. Set print range

    Clear the check boxes of the pages you do not want to print.
    In the setting view, the pages that you cleared are deleted and only the pages to be printed are displayed.
    Check the pages to be printed, and then click OK.

    figure:Settings preview displayed on the Page Setup tab

    Note

    • In the setting view on the left side of the Pages to Print dialog box, you can also clear the display by clicking the pages you do not want to print.
      To redisplay a cleared page, click that page again.
    • To switch the pages to display/hide, click Invert in the Pages to Print dialog box.
  3. Complete the setup

    Click OK on the Layout tab.
    When you print, only the specified pages are printed.

Important

  • If you partition and print as a poster, the source document will be printed in enlarged form, so the print results may become rough.