Printing By Setting Print Purpose

The procedure for printing by using a print purpose is as follows:

1. Open the printer driver setup window

2. Select the media type

   Select the type of paper loaded in the printer from the Media Type list on the Main tab.
   If Auto (Use Printer Settings) is selected, the paper configured in printer settings is printed.

   

3. Select print setting mode

   From the pull-down menu, select Easy Settings.

   

4. Select print purpose

   For Print Target, select the setting that matches the document.

   Default Settings

   Select this setting to print a general document such as a business documents.

   Photo (Color)

   Select this setting to print a color illustration or a photo.

   Poster

   Select this setting to print a poster.

   CAD (Color Line Drawing)

   Select when printing data such as drawings.

   CAD (Monochrome Line Drawing)

   Select when printing data such as drawings in monochrome.

   Perspective, GIS

   Select when printing data such as perspectives and GIS.

   Note

   • To check the settings of the items that are set by Print Target, click View Settings.

5. Select the paper size

   From the Page Size list on the Page Setup tab, select the same size as that of the document that was created with the application software.
   The current settings are displayed in the settings preview on the left side of the window.

   

6. Select the paper source

   For Paper Source, select the setting that matches your purpose.

   Important

   • The paper feed method will differ depending on the lower level (roll paper 2) settings or roll unit option settings.

7. Set the other items

   Set the other items as necessary.

8. Complete the setup

   Click OK.
   When you print, the document is printed with settings to match the specified print purpose.