Printing on Postcards

1. Load postcard on the printer

2. Open the printer driver setup window

3. Select commonly used settings

   Display the Quick Setup tab, and for Commonly Used Settings, select Standard.

4. Select the media type

   For Media Type, select Ink Jet Hagaki (A), Ink Jet Hagaki, Hagaki K (A), Hagaki K, Hagaki (A), or Hagaki.

   Important

   • This printer cannot print on postcards that have photos or stickers attached.
   • When you use the automatic duplex printing function to print a postcard, print the address side first and then print the message side.
   • When printing on each side of a postcard separately, you will get cleaner printing if you print the message side first and then print the address side.
   • The paper settings on the printer driver are different, depending on whether you are printing on the address side or the message side.
     To check the current printer settings or to apply the printer settings to the printer driver, click Printer Media Information... from the Quick Setup tab, and specify the settings in the dialog box that appears.
     For details about the paper information to be registered to the printer driver and on the printer, see the following:
     • Paper Settings on the Printer Driver and the Printer (Media Type)
     • Paper Settings on the Printer Driver and the Printer (Paper Size)
   • When you use the automatic duplex printing function, register the paper information for the side to be printed first.

5. Select the paper size

   For Printer Paper Size, select Hagaki 100x148mm or Hagaki 2 200x148mm.

   Important

   • Return postcards can be used only when you print them from the computer.
   • When printing a return postcard, always set the paper size to Hagaki 2 200x148mm from your application software or the printer driver.
   • Do not fold the return postcard. If a crease is formed, the printer will not be able to feed the postcard properly, and this condition will cause line shifts or a paper jam.
   • With return postcards, automatic duplex printing and borderless printing cannot be used.

6. Set the print orientation

   To print the address horizontally, set Orientation to Landscape.

7. Select the print quality

   For Print Quality, select High or Standard, according to your purpose.

8. Click OK

   When you perform printing, the data will be printed onto the postcard.

Important

• If you want to display a guide message when performing postcard printing, open the Maintenance tab and click View Printer Status to start the Canon IJ Status Monitor.
  On the Option menu, choose Display Guide Message and click Hagaki Printing to enable the setting.
  To hide these guide messages, select the Do not show this message again check box.
• When printing on media other than postcards, load the media according to usage method of that media, and click Start Printing.