skip to main text

Switching the Paper Source to Match the Purpose

In this printer, there are two paper sources, a rear tray and a cassette.
You can facilitate printing by selecting a paper source setting that matches your print conditions or purpose.

The procedure for setting paper source is as follows:

You can also set the paper source on the Quick Setup tab.

  1. Open the printer driver setup window

  2. Select the media type

    Select the type of paper loaded in the printer from the Media Type list on the Main tab.

  3. Select the paper source

    From the Paper Source list on the Main tab, select the paper source that matches your purpose.

    figure:Paper Source on the Main tab
    Automatically Select
    Based on the paper settings in the printer driver and the paper information registered on the printer, the printer automatically determines the paper source and feeds paper.
    Rear Tray
    Paper is always fed from the rear tray.
    Cassette
    Paper is always fed from the cassette.

    Important

    • Plain paper that is not Letter 8.5"x11" 22x28cm, A5, A4, or B5 and paper types other than plain paper cannot be fed from the cassette.
  4. Click OK

    When you perform print, the printer uses the specified paper source to print the data.

    Note

    • If the paper settings in the printer driver differ from the paper information registered on the printer, an error may occur. For instructions on what to do if an error occurs, see "Paper Settings."
      To check the current printer settings or to apply the printer settings to the printer driver, click Printer Media Information... from the Quick Setup tab, and specify the settings in the dialog box that appears.
      For details about the paper information to be registered on the printer, see the following:
    • If Media Type in the Main sheet is set to Premium Fine Art Rough, we recommend that you set Paper Size in the Page Setup sheet to "XXX (Art Paper Margin 35)."
      For information about printable ranges, refer to "Print Area."