skip to main text

Printing on Postcards

The method for printing Hagaki is described below.

  1. Load postcard on the printer

  2. Open the printer driver setup window

  3. Select the media type

    Select Hagaki from Media Type on the Main tab, and then select the Hagaki type you want to use.

    Important

    • This printer cannot print on postcards that have photos or stickers attached.
    • You will get cleaner printing if you print the address side first, and then print the message side.
    • The paper settings on the printer driver are different, depending on whether you are printing on the address side or the message side.
      For details about the paper information to be registered to the printer driver and on the printer, see the following:

  4. Select the paper size

    Go to Page Size in the Page Setup tab, and then select Hagaki 100x148mm or Hagaki 2 200x148mm.

    Important

    • Return postcards can be used only when you print them from the computer.
    • When printing a return postcard, always set the paper size to Hagaki 2 200x148mm from your application software or the printer driver.
    • Do not fold the return postcard. If a crease is formed, the printer will not be able to feed the postcard properly, and this condition will cause line shifts or a paper jam.

  5. Click OK

    When you perform printing, the data will be printed onto the postcard.

Note

  • When printing the address in landscape orientation, select Landscape under Orientation on the Page Setup tab.