Printing Hanging and Horizontal Banners (Large-Format Printing)

Create document by using application software

Open the printer driver setup window

Select the paper size

Select the same original paper size created in the application soft in the Page Size on the Page Setup tab.
In the event an optional size is set in the application software, select Custom Size from Custom Paper Size in Page Size and designate size in the dialog box that appears.

Select roll width

Select the equivalent to the paper width of the roll set in the printer under Roll Paper Width.

Set Enlarged/Reduced Printing

Check Enlarged/Reduced Printing and select Fit Roll Paper Width.
When the Information dialog box appears, select the equivalent to the paper width of the roll set in the printer.

Complete the setup

Click OK.
When printing is executed, a drapery or banner can be printed according to the roll.

Register user-defined paper

Register both the actual desired print size (user-defined paper 1) and original document size created in application (user-defined document size 2) in the Size Options... under the Page Setup tab.

Note

• Please set user-defined paper 2 to the same aspect ratio as user-defined paper 1. If the aspect ratio differs, the enlarged image may not turn out to be the expected size.
  After creating user-defined paper 1, if user-defined paper 2 is created after checking Fix the Ratio of the Width to Height, settings can be set to the same aspect ratio.
  Also set user-defined paper 2 to a size that doesn't exceed the maximum size supported by the application.
  For example, when printing on paper 600mm wide and 3,000mm long, use the following settings.
  (when setting length to 1/6 the user-defined paper)
  • User-defined paper 1: Width 600mm, Height 3,000mm
  • User-defined paper 2: Width 100mm, Height 500mm

Create original document in application software

Use the registered user-defined paper 2 size to create original document using an application.

Open printer driver settings screen

Select Paper Size

Select registered user-defined paper 1 from Custom Paper Size in the Page Size on the Page Setup tab.

Complete the setup

Click OK.
When you print, the hanging or horizontal banner is printed by using the user-defined size.