skip to main text

Set a Custom Size Roll Width

By specifying the roll paper width with a value, you can use roll paper with a width that cannot be selected in Roll Paper Width.
The procedure for setting custom size roll width is described below.

  1. Open the printer driver setup window

  2. Select the paper source

    From the Paper Source list on the Page Setup tab, select Roll Paper.

    figure:Paper Source on the Page Setup tab

  3. Select paper roll width

    In Roll Paper Width, select Custom Size (XXXX).
    The Custom Size Settings dialog box opens.

  4. Set paper roll width

    Enter the roll width you want to use, specify Units, and then click OK.

    figure:Custom Size Settings dialog box

    Note

    • If the value you entered is the same as the standard roll width, a message will be displayed, and the standard roll paper size will be set.
    • Get the paper information of the printer from Get Information in the Main tab.

  5. Complete the setup

    Click OK on the Page Setup tab.
    If you perform the print, the roll paper with the specified width will be used for printing.

Note

  • If the paper settings in the printer driver differ from the paper information registered on the printer, an error message may appear on the printer's operation panel. You can execute Print, but you may not obtain the correct printing result.