skip to main text

Printing by Automatically Switching Upper-level and Lower-level Roll Papers

You can print by automatically switching Roll 1 and Roll 2 depending on the media type or your purpose.

The procedure for printing by switching the roll papers is as follows:

  1. Load roll papers in upper and lower levels of printer

  2. Open the printer driver setup window

  3. Select the media type

    Select the type of paper loaded in the printer from the Media Type list on the Main tab.

  4. Select the paper size

    From the Page Size list on the Page Setup tab, select the same size as that of the document that was created with the application software.

  5. For Paper Source, select Roll Paper (Auto)

  6. Select roll paper width

    For Roll Paper Width, select the width of the roll paper loaded in the printer.

  7. Selecting the printing method for the roll paper

    When performing enlarged/reduced printing in accordance with the roll width, place a checkmark next to Enlarged/Reduced Printing and select the Fit Roll Paper Width.

  8. Set the other items

    To rotate the document 90 degrees and print it, select the Rotate Page 90 degrees check box.
    The current settings are displayed in the settings preview on the left side of the Page Setup tab.

    Note

    • If you rotate a portrait document 90 degrees and print it at that horizontally, you may be able to save paper depending on the paper size.

    Important

    • When you select the Rotate Page 90 degrees check box and print the document, the document will be rotated 90 degrees only if the vertical length of the document fits in the width set in Roll Width.
      Therefore to use this function, correctly set Roll Width to the width of one of the roll papers loaded in the printer.

      Document

      		  

      Roll Width:
      ISO A1/A2 Roll (594.0 mm)
    • If the roll papers loaded in the upper and lower levels are different media types, the document is printed on the roll paper that matches the media type specified in the print job.
      If the document is being rotated 90 degrees for printing and the roll papers loaded in the upper and lower levels have different widths and different media types, set the correct combination of width and media type so that they match one of the roll papers loaded in the printer.

  9. Complete the setup

    Click OK.
    When you print, the paper source is switched automatically to roll paper.

Important

  • On the operation panel, if Device settings -> Paper-related settings -> Roll paper auto switching is set to Do not identify size, the document may be printed on the unintended roll paper. Canon recommends that you set this setting to Identify size before you print.
  • 2-level roll switching is not possible when the paper rolls being fed on the platen are not compatible with automatic cut-off. For checking which types of paper are compatible with automatic cut-off, look up the paper you want to use on the "Paper Information List."

Note

Printing by Saving Paper

Depending on the paper size that was specified in the print job, the printer automatically identifies the roll paper that will produce the smaller margins.

Whether or not the page is rotated 90 degrees, the printer prints using conditions that produce the smallest paper margins from among the Roll1 and Roll2 combinations.

Document

  

Roll 1: ISO A1/A2

Roll 2: ISO A3/A4

  1. Select as described below:

    • If you are using Windows 10, right-click the Start menu, and select Control Panel -> Hardware and Sound -> Devices and Printers.
      The Devices and Printers window is displayed.
    • If you are using Windows 8.1, Windows 8, Windows Server 2012 R2, or Windows Server 2012, from the Desktop charms, select Settings -> Control Panel -> Hardware and Sound (Hardware) -> Devices and Printers.
      The Devices and Printers window is displayed.
    • If you are using Windows 7 or Windows Server 2008 R2, select the Start menu -> Control Panel -> Hardware and Sound (Hardware) -> Devices and Printers.
      The Devices and Printers window is displayed.
    • If you are using Windows Vista or Windows Server 2008, select the Start menu -> Control Panel -> Hardware and Sound -> Printers.
      The Printers window is displayed.

  2. Display setup window

    Right-click the "Your model name" icon, and select Printer properties (in Windows 10, Windows 8.1, Windows 8, or Windows 7) or Properties (in Windows Vista).
    The printer's Properties window appears.

  3. Set automatic paper source switching

    On the Device Settings tab, select the Automatically switch paper sources (paper size priority) check box.

  4. Click Acquire Status

    When the confirmation message appears, click Yes.
    Your computer gets the paper size information from the printer and displays the width of the roll paper that is actually loaded in the printer.

    Important

    • When you replace the roll paper loaded in the printer, always click Acquire Status to obtain the roll paper width information. If the roll paper width is not set correctly, you may not be able to print the document as intended.

  5. Open the printer driver setup window

  6. Select the media type

    Select the type of paper loaded in the printer from the Media Type list on the Main tab.

  7. Select the paper size

    From the Page Size list on the Page Setup tab, select the same size as that of the document that was created with the application software.

  8. For Paper Source, select Roll Paper (Auto)

  9. Select roll paper width

    For Roll Paper Width, select the width of the roll paper loaded in the printer.

  10. Set the other items

    To rotate the document 90 degrees and print it, select the Rotate Page 90 degrees check box.

  11. Complete the setup

    Click OK.
    When you print, the paper source is switched automatically to roll paper.

Important

  • This method switches the upper and lower levels depending on the paper size specified in the print job. Always load the same media type for the roll papers in the upper and lower levels of the printer.
    If different types of paper are loaded, an error could occur and you may not be able to print the document as intended.
  • If roll papers of the same width and type are loaded in the upper and lower levels and the Automatically switch paper sources (paper size priority) check box is selected on the Device Settings tab, Roll 1 (upper level roll paper) will always be used for printing. If roll papers of the same width and type are loaded in the upper and lower levels and you want to automatically switch the roll papers, clear the Automatically switch paper sources (paper size priority) check box.

Note

  • If Roll 1 and Roll 2 produce the same margins, Roll 1 is used for printing.