Managing the Printer Power

Power Off

The Power Off function turns off the printer. When you use this function, you will not be able to turn the printer on from the Canon IJ Printer Assistant Tool.

1. Open Canon IJ Printer Assistant Tool

2. Perform power off

   Click Power Off. When the confirmation message appears, click OK.

   The printer power switches off.

Auto Power

Auto Power allows you to set Auto Power On and Auto Power Off.
The Auto Power On function automatically turns on the printer when data is received.
The Auto Power Off function automatically turns off the printer when there are no operations from the printer driver or the printer for a specified period of time.

1. Open the Canon IJ Printer Assistant Tool

2. Check that the printer is on, and then click Auto Power

   The Auto Power Settings dialog box will open.

   Note

   • If the printer is off or if communication between the printer and the computer is disabled, an error message may appear because the computer cannot collect the printer status.
     If this happens, click OK to display the most recent settings specified on your computer.

3. If necessary, complete the following settings:

   Auto Power On

   Specifying Enable from the list will turn the printer on upon receipt of print data.

   Auto Power Off

   Specify the time from the list. When this time lapses without any operations from the printer driver or the printer, the printer is turned off automatically.

4. Apply the settings

   Click OK. When the confirmation message appears, click OK.

   The setting is enabled after this. When you want to disable this function, select Disable from the list according to the same procedure.

Note

• When the printer is turned off, the Canon IJ Status Monitor message varies depending on the Auto Power On setting.
  When the setting is Enable, "Printer is standing by" is displayed. When the setting is Disable, "Printer is offline" is displayed.