skip to main text

Switching the Paper Source to Match the Purpose

In this printer, there are two paper sources, a manual feed tray and a top feed.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.

The procedure for setting paper source is as follows:

You can also set the paper source on the Quick Setup tab.

  1. Open the printer driver setup window

  2. Select the media type

    Select the type of paper loaded in the printer from the Media Type list on the Main tab.

  3. Select the paper source

    From the Paper Source list, select the paper source that matches your purpose.

    figure:Paper Source on the Main tab
    Manual Feed
    Paper is supplied from the manual feed tray in the back.

    Important

    • When A5, B5, 4"x6" 10x15cm, 5"x7" 13x18cm, 7"x10" 18x25cm, L 89x127mm, 2L 127x178mm, Square 5"x5" 13x13cm, Hagaki 100x148mm, Hagaki 2 200x148mm, Envelope Com 10, Envelope DL, Nagagata 3 4.72"x9.25", Nagagata 4 3.54"x8.07", Yougata 4 4.13"x9.25", or Yougata 6 3.86"x7.48" is selected for Page Size on the Page Setup tab, paper cannot be supplied from the manual feed tray in the back.
    • When Plain Paper, Envelope, Hagaki A, Ink Jet Hagaki, Hagaki K, Hagaki, High Resolution Paper, or T-Shirt Transfers is selected for Media Type on the Main tab, paper cannot be supplied from the manual feed tray in the back.
    Top Feed
    Paper is fed from the top feed.

    Important

    • When Heavyweight Photo Paper, Premium Fine Art Rough, Photo Paper Pro Premium Matte A, or Extra Heavyweight Fine Art Paper is selected for Media Type on the Main tab, paper cannot be supplied from the top feed.

  4. Click OK

    When you perform print, the printer uses the specified paper source to print the data.

    Note