skip to main text

Switching the Paper Source to Match the Purpose

In this printer, there are two paper sources, a manual feed tray and a rear tray.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.

The procedure for setting paper source is as follows:

You can also set the paper source on the Quick Setup tab.

  1. Open the printer driver setup window

  2. Select the media type

    Select the type of paper loaded in the printer from the Media Type list on the Main tab.

    Note

    • When Other Glossy Paper (Wide Margins), Fine Art "Museum Etching", Photo Paper Pro Premium Matte, Premium Fine Art Smooth, Other Fine Art Paper 1, Other Fine Art Paper 2, or Canvas is selected for Media Type on the Main tab, click the Page Setup tab and select "XXX (Art Paper Margin 30)" from the Page Size list.

  3. Select the paper source

    From the Paper Source list, select the paper source that matches your purpose.

    figure:Paper Source on the Main tab
    Manual Feed
    Paper is supplied from the manual feed tray in the back.

    Important

    • When A5, B5, 4"x6" 10x15cm, 5"x7" 13x18cm, L 89x127mm, 2L 127x178mm, Hagaki 100x148mm or Hagaki 2 200x148mm is selected for Page Size on the Page Setup tab, paper cannot be supplied from the manual feed tray in the back.
    • When Plain Paper, Hagaki A, Ink Jet Hagaki or Hagaki is selected for Media Type on the Main tab, paper cannot be supplied from the manual feed tray in the back.
    Rear Tray
    Paper is fed from the rear tray.

    Important

    • When 14"x17" 36x43cm is selected for Page Size on the Page Setup tab, paper cannot be supplied from the rear tray.
    • When Fine Art "Museum Etching", Photo Paper Pro Premium Matte, Premium Fine Art Smooth or Canvas is selected for Media Type on the Main tab, paper cannot be supplied from the rear tray.

  4. Complete the setup

    Click OK.
    When you execute print, the printer uses the specified paper source to print the data.