skip to main text

Aligning the Print Head Position from Your Computer

Print head alignment corrects the installation positions of the print head and improves deviated colors and lines.

This printer supports two head alignment methods: automatic head alignment and manual head alignment. Normally, the printer is set for automatic head alignment.
If the printing results of automatic print head alignment are not satisfactory, perform manual head alignment.

The procedure for performing automatic print head alignment is as follows:

Note

  • If the disc tray guide is open, close it.

Print Head Alignment

  1. Open the printer driver setup window

  2. Click Print Head Alignment on the Maintenance tab

    The Start Print Head Alignment dialog box opens.

  3. Load paper in the printer

    Load two sheets of A4 size or Letter size plain paper into the rear tray.

    Note

    • Depending on the condition of the printer, you may need to use 3 sheets of A4 size or Letter size plain paper.
    • The number of sheets to be used differs when you select the manual head alignment.

  4. Execute head alignment

    Make sure that the printer is on and click Align Print Head.
    Follow the instruction in the message.

    Important

    • Do not open the top cover while printing is in progress.

    Note

    • Wait until printing ends before performing other operations. Printing takes about 5 minutes to complete.

Note

  • To print and check the current setting, open the Start Print Head Alignment dialog box, and click Print Alignment Value.