skip to main text

Printing with Easy Setup

This section describes the simple procedure for setting the Quick Setup tab so that you can carry out appropriate printing on this printer.

  1. Check that the printer is turned on

  2. Load paper on the printer

  3. Open the printer driver setup window

  4. Select a frequently used profile

    In Commonly Used Settings on the Quick Setup tab, select a printing profile suited for the purpose.
    When you select a printing profile, the Additional Features, Media Type, and Printer Paper Size settings are automatically switched to the values that were preset.

    figure:Commonly Used Settings on the Quick Setup tab

  5. Select the print quality

    For Print Quality, select Highest, High or Standard according to your purpose.

    figure:Print Quality on the Quick Setup tab

    Important

    • The print quality settings that can be selected may differ depending on a printing profile.

  6. Select the paper source

    Select Manual Feed or Top Feed that matches your purpose for Paper Source.

    figure:Paper Source on the Quick Setup tab

    Important

    • The paper source settings that can be selected may differ depending on the paper type and size.

  7. Complete the setup

    Click OK.
    When you execute print, the document is printed with settings that match your purpose.

    figure:OK on the Quick Setup tab

Important

  • If you are performing large-format printing, make sure that the ink tank has plenty of remaining ink.
  • When you select the Always Print with Current Settings check box, all settings specified on the Quick Setup, Main, and Page Setup tabs are saved, and you can print with the same settings from the next time as well.
  • In the Commonly Used Settings window, click Save... to register the specified settings.
  • To print by using the manual feed tray, perform the operation according to the instructions displayed on the screen.

Note

  • If the paper settings on the printer driver differ from the top feed or the manual feed tray paper information registered on the printer, an error may occur. For instructions on what to do if an error occurs, see "Paper Settings."
    For details about the top feed or the manual feed tray paper information to be registered on the printer, see the following:
  • When you set Media Type to Premium Fine Art Smooth, Photo Paper Pro Premium Matte A, Photo Paper Pro Premium Matte or Matte Photo Paper in the printer driver, we recommend that you set Page Size to 4"x6" 10x15cm, L 89x127mm, or "XXX (Margin 25)" in the printer driver.
    When a page size other than "XXX (Margin 25)" is selected, an error message may appear.
    Select one of the page sizes in the displayed dialog box, or go to the Page Setup tab, display the Print Options dialog box, and change the Cancel the safety margin regulation for paper size setting.