PP072W

Settings on Client PC

After setting up the print server system, set up the client system.

The procedure for setting up the client systems is as follows:

If you are using Windows 7 or Windows Vista

  1. Install the printer driver on the client systems

    For installation instructions, see "Installing the MP Drivers."

    Note
    • During the installation, a screen prompting you to turn the printer on appears. Click Manual Selection and then select an appropriate port to complete your installation.

  2. Start the wizard

    • If you are using Windows 7, select the Start menu -> Devices and Printers -> Add a printer.

    • If you are using Windows Vista, select the Start menu -> Network -> Add Printer.

    The Add Printer window appears.

  3. Add a printer

    Select Add a network, wireless or Bluetooth printer, and click the icon for the printer that you have configured on the print server system to be shared, and then click Next.

    Note
    • If the icon for the printer is not displayed, check that the printer is actually connected to the print server.

    • It may take some time for the icon for the printer to appear.

  4. Complete the setup

    Take the appropriate action as described on the screen and then click Finish.

    • If you are using Windows 7, the icon for the shared printer will be created in the Devices and Printers window.

    • If you are using Windows Vista, the icon for the shared printer will be created in the Printers window.

    The setup on the client systems is complete. You can now share the printer in the network.

If you are using Windows XP

  1. Install the printer driver on the client systems

    For installation instructions, see "Installing the MP Drivers."

    Note
    • During the installation, a screen prompting you to turn the printer on appears. Click Manual Selection and then select an appropriate port to complete your installation.

  2. Start the wizard

    Select the start menu -> Control Panel -> Printers and Other Hardware -> Printers and Faxes -> Add a printer.

    When Welcome to the Add Printer Wizard screen appears, click Next.

  3. Add a printer

    Select A network printer, or a printer attached to another computer, then click Next.

    On the Specify a Printer window, click Next and then search for the print server system.

    Click the icon for the printer that you have configured on the print server system to be shared, and then click Next.

    Note
    • If the icon for the printer is not displayed, check that the printer is actually connected to the print server.

  4. Complete the setup

    Take the appropriate action as described on the screen and then click Finish.
    The icon for the shared printer will be created in the Printers and Faxes window.

    The setup on the client systems is complete. You can now share the printer in the network.

Back Next

Page top