Printing with Easy Setup

This section describes the simple procedure for setting the Quick Setup tab so that you can carry out appropriate printing on this printer.

1. Check that the printer is turned on

2. Load paper on the printer

3. Open the printer driver setup window

4. Select a frequently used profile

   In Commonly Used Settings on the Quick Setup tab, select a printing profile suited for the purpose.
   When you select a printing profile, the Additional Features, Media Type, and Printer Paper Size settings are automatically switched to the values that were preset.

   

5. Select the print quality

   For Print Quality, select High, Standard, or Draft according to your purpose.

   

   Important

   • The print quality settings that can be selected may differ depending on a printing profile.

6. Complete the setup

   Click OK.
   When you execute print, the document is printed with settings that match your purpose.

   

Important

• When you select the Always Print with Current Settings check box, all settings specified on the Quick Setup, Main, and Page Setup tabs are saved, and you can print with the same settings from the next time as well.
• In the Commonly Used Settings window, click Save... to register the specified settings.

Note

• If the paper settings on the printer driver differ from the cassette paper information registered on the printer, an error may occur. For instructions on what to do if an error occurs, see "Paper Settings."
  For details about the cassette paper information to be registered on the printer, see the following:
  • Paper Settings on the Printer Driver and the Printer (Media Type)
  • Paper Settings on the Printer Driver and the Printer (Paper Size)